The mount decides the shortlist first
These two speedlights are not interchangeable across camera brands. The Nikon SB-700 is listed as compatible with Nikon FX and DX format SLRs and the Nikon Creative Lighting System. The Godox V1 in this listing is the Olympus–Panasonic version, so it is intended for those camera mounts. If you shoot a Nikon mirrorless body, the SB-700 is the one whose supplied compatibility statement matches your system; if you shoot Olympus or Panasonic, the V1 is the relevant option here. Neither listing claims cross-brand hot-shoe compatibility, so treat the mount as a hard filter before comparing light quality.
That makes this less a head-to-head contest and more a decision about which system you are already in. The useful comparison is what each flash does once it is on the right camera.
Compatibility and power facts
- Nikon SB-700 Speedlight Flashgun: Compatible with Nikon FX and DX format SLRs and the Nikon Creative Lighting System; I-TTL intelligent flash. Confirms the camera family and metering system the SB-700 is designed to work with.

Nikon SB-700 Speedlight Flashgun - Godox V1 Flash Speedlight For Olympus – Panasonic: Compatible with Olympus–Panasonic cameras; GN 28m (ISO 100, 50mm zoom). Establishes the mount and a guide number you can compare against the Nikon figures.

Godox V1 Flash Speedlight For Olympus – Panasonic - Nikon SB-700 Speedlight Flashgun: Guide number 25 (EVEN)/28 (STD)/30 (CW) at 35mm, and maximum guide number 38 (STD) at 120mm, FX-format, ISO 100, metres. Shows how output changes with zoom position and illumination pattern, which matters when you move the flash off-camera.
- Godox V1 Flash Speedlight For Olympus – Panasonic: Powered by a 7.2V, 2600mAh, 18Wh Li-ion battery; approximately 480 full-power flashes per charge. A rechargeable pack changes your off-camera power routine compared with loose cells.
Round head versus rectangular beam
The V1's defining feature is its round fresnel head. The supplied description says it produces a round beam rather than the square beam of regular speedlight heads, with a more uniform falloff at the edges and a softer-looking transition back into unlit areas. That matters off-camera because you are often shaping the light with modifiers, and the listing notes that many modifiers are round, which helps fill them more evenly.
The SB-700 takes the conventional rectangular approach but gives you control over the pattern itself: centre-weighted, Even and Standard illumination patterns can be selected to suit the situation. Off-camera, those patterns let you bias coverage toward the centre or spread it more evenly, which is useful when you are bouncing or filling a small modifier and want to control how the edges of the frame are lit.
What each head and control set gives you
- Godox V1 Flash Speedlight For Olympus – Panasonic: Round zoom head design; flash zoom 28–105mm; 2.5mm sync port. The zoom range and sync port are the practical off-camera connections and coverage limits.
- Nikon SB-700 Speedlight Flashgun: Multi-step power-zoom covers 24–120mm; large LCD screen and conveniently placed controls. Wider zoom coverage and a clear interface help when you adjust the flash on a stand.
- Godox V1 Flash Speedlight For Olympus – Panasonic: Hot-shoe lock can be locked or unlocked with a button push and quarter turn rather than a turning locking ring. A quicker mount matters when you move a flash between stand and camera repeatedly.
- Nikon SB-700 Speedlight Flashgun: A:B mode enables wireless control of multiple flash units and light ratios. Relevant if you plan a multi-flash off-camera setup within the Nikon system.
Modifiers and the hidden accessory cost
The Godox listing is explicit that the V1 requires the Godox AK-R1 kit of modifiers to maximise its potential. That kit contains magnetically attached snoot, four-way barndoors and a honeycomb grid. If you are buying the V1 for off-camera shaping, budget for that kit rather than assuming the round head alone gives you control. The SB-700 listing does not specify a required modifier kit, so the supplied information does not establish an equivalent mandatory accessory; check what you already own before treating one as included.
Power, recycling and heat in real off-camera use
The V1's Li-ion pack is rated for roughly 480 full-power flashes per charge, which reduces the need to carry spare cells for a long shoot. The SB-700's supplied details give recycling times of about 2.5 seconds with NiMH or alkaline batteries and about 3.5 seconds with lithium batteries, but the selected record does not state a flash count per set. That is a genuine gap in the supplied evidence, not a claim that the SB-700 cannot keep up.
The SB-700 also has an automatic thermal protection system that warns of excessive heat during high-intensity firing and delays recycling if necessary. That is worth knowing if you plan rapid full-power bursts off-camera, where heat builds faster than in casual on-camera use.
Which flash fits which off-camera plan
- Nikon FX or DX body, especially a DSLR or Nikon CLS setup: The SB-700 matches the listed Nikon compatibility, offers I-TTL, A:B wireless ratio control and selectable illumination patterns. Its rectangular head suits standard modifiers and the supplied record does not require a specific accessory kit.
- Olympus or Panasonic body: The V1 is the listed match. Its round head, 2.5mm sync port and Li-ion power suit off-camera shaping, but plan for the AK-R1 modifier kit to get the most from the head.
- Mixed-brand or future-system planning: Neither listing claims cross-brand hot-shoe compatibility. Choose the version that matches your current camera mount rather than assuming one flash will move between systems.
What the supplied information leaves open
The records do not give a full list of supported wireless standards, battery life figures for the SB-700, or step-by-step off-camera setup instructions for either unit. The V1 details mention 2.4GHz wireless with an operating range up to 100 metres and the SB-700 mentions CLS and A:B mode, but neither record confirms every commander/slave combination you might attempt. Treat those as areas to verify against the manufacturer documentation for your exact camera and firmware before you build a multi-flash plan.



